Wheel Truing

出典: くみこみックス

Wheel truing is truly a thing that is extremely effortless

to do. Even if you have no knowledge with mountain

biking or truing a wheel, it doesn't take a rocket

scientist to achieve it.

The very first factor to do is make certain that none of your

spokes are loose. To verify, grab every spoke in turn

and try to shake it back and projector headlights forth. If the spoke

wobbles, or tends to make pinging and grating noises, it's

loose. If it's www loose, add tension to the spoke by

turning the spokey anti-clockwise with your finger

and thumb pressure.

Keep turning and shaking till the noise is gone

and the spoke doesn't wobble or move. Move on to

the subsequent spoke till you have gone all the way about

the wheel and checked them all.

Now, it's time to see just how accurate the wheel actually

is. Turn your bike upside down then spin the wheel

to see exactly where it comes closest to rubbing on the

brake.

You may need to have to rotate the wheel backwards then

forwards analyze audi a4 grill to find the middle of the bulge on the

wheel. Tighten the spokes which run on to the

other side of the rim. If individuals spokes are already

tight, you are going to want to loosen a couple of of the spokes

which run to the bulge side of the hub.

Truing a wheel is less difficult than you might feel, although

it can be a tiny difficult with some wheels. If

you want to loosen spokes, be very careful that

you do not break them. They can be very tough

to loosen on older mountain bikes.

(word count 295)

PPPPP