What Are Corning (Siecor) Unicam Connectors? Fiber Optic Tutorial Series One particular

出典: くみこみックス

For normal epoxy and polish fiber optic connectors, the termination approach generally consists of 7 actions (up to 30 minutes) which are:

1. Strip the optical fiber to expose the 125um (140um or other sizes depending on your fiber) fiber cladding

two. Clean the exposed bare fiber with isopropyl alcohol and lint-totally free wipes

3. Insert the bare fiber into the connector center hole till ...

The termination procedure for market standard epoxy and polish fiber optic connectors.

For common epoxy and polish fiber optic connectors, the termination procedure usually includes 7 actions (up to 30 minutes) which are:

1. Strip the optical fiber to expose the 125um (140um or other sizes depending on your fiber) fiber cladding

two. Clean mcse course the exposed bare fiber with isopropyl alcohol and lint-cost-free wipes

3. Insert the bare fiber into the connector center hole till dod 8570 training the fiber stops

4. Inject fiber optic epoxy with a syringe dispenser into the connector physique

five. Remedy the fiber optic epoxy with high temperature which could be 85C, 100C or even 120C depending on the kind of fiber optic epoxy(you need to have a unique connector epoxy curing oven for this objective)

6. Scribe the fiber protruding from the tip of the fiber connector

7. Polish the connector tip with lapping films either by hand or specialized fiber optic connector polishing machine(specially for single mode fiber connectors)

So you see that the process for terminating optical fiber is a complex procedure. It takes time and practice and only highly trained fiber optic technicians can do the perform appropriately with high yield ratio.

But fiber optic contractor installers for premise networks generally do not have the luxury of time or the high-priced tools for this type of termination. And that is when speedy termination fiber optic connectors come into handy.

Rapid termination fiber optic connectors are specially designed for quickly termination with out lots of knowledge necessary. A fiber optic contractor installer can do a fast termination inside two~three minutes.

There are many various designs but the typical 1 such as Corning Siecor Unicam connector is like this:

The Unicam connector is pre-polished in factory with a fiber stub hidden inside the physique of the connector. The installer then only wants five actions to total a Unicam connector termination with market common high quality.

1. Strip the optical fiber to expose the 125um fiber cladding

two. Clean the exposed bare fiber with isopropyl alcohol and lint-free of charge wipes

three. Cleave the fiber with a cleaver

4. Insert the fiber into the Unicam connector until it stops

five. Crimp the fiber onto the Unicam connector with a fiber connector crimper tool

A fiber optic contractor installer can make a Unicam connector termination within 2 minutes. Compared to cissp the standard epoxy approach (up to 30 minutes), that is 87% time saved.

Unicam connectors provide equivalent insertion loss performance as a common epoxy and polish connector. Unicam connectors also meet or exceed the mechanical and optical efficiency specified by EIA/TIA 568.B.

Fiber Optic For Sale Co stocks all types of Corning Siecor Unicam connectors including Unicam ST, TKT Unicam CTS SF, Corning TKT Unicam, Unicam LC, Unicam SC, Unicam tool kit and TKT Unicam Elite.