KillingsworthStowell171
出典: くみこみックス
water fed pole - During the last few years window cleaning with a water fed pole has gained in popularity, and is the preferred way of cleaning outside windows. Enough time saving within the traditional method of window cleaning with all the squeegee is often as much as 50percent faster. So what is involved, and what equipment would one need??
Firstly we'll begin with the comb as it is negligence the device that is doing the cleaning. There are many forms of brush on the market, nevertheless the main section of the brush to clean windows would be the jets that spray the lake, and the bristles which can be in touch with the glass. There are 2 forms of jets, and so are usually known as fan jets, or pencil jets. Fan sprays usually have water coming out pressurized, and often cover the whole width with the brush. Pencil jets have water flowing from two places in the brush only, and the water just isn't under any pressure. Rinsing with all the brush on the glass is usually preferred by people using fan jets, and pencil jets usually preferred by people who lift the brush off of the glass when rinsing. The next important part of the brush will be the bristles, these come in all lenghts, shapes, and density, but as a rule you don't want them flocked(bashed on the ends)because they trap dirt, you also do not want them too dense, as the dirty water won't flow along the glass, and also you desire them crinkled, so that more of the bristle is within experience of the glass which aids scrubbing.
The pole, the first window cleaning water fed pole to come in the marketplace were very heavy constructed mostly of fibre glass, and were quite conveniently made by the maker never to be taken apart, meaning all different sizes were needed, to succeed in different heights of window. Now thankfully there are lots of kinds of pole on the market, that have been developed for window cleaning, by window cleaners. These poles are receiving lighter stronger, and far less costly.
water fed pole systems - Water treatment, You need to take all the dissolved solids out your regular faucet water, so as when the water evaporates in the glass there is nothing forgotten. If you used ordinary plain tap water to wash the windows, if the water evaporated the dissolved solids would be left out, showing up as dirty marks on the glass. There's two methods of purifying the regular faucet water Deionization, and Reverse Osmosis, and the one you will need can be determined by how hard your tap water is, For hard water Reverse Osmosis, as well as for soft water Deionization.
Other equipment needed, a pump to transfer the lake from the holding vessel for the window. In addition, you have to have a way of carrying water to the work site which can be a van or trailer having a tank fitted, or a trolley with water containers about it. A hose reel is required to transfer water from the tank for the pole. Additionally you need a 12V power source to use the pump.
There are numerous good window cleaning suppliers selling systems, and the three main questions i hear you ask before you buy is, what sizes watter treatment system is supplied (measured in GPD) How high does the pole reach, and is also the tank baffled and secured within the van.
water fed poles - Each time a water fed pole window cleaning method is purchased, it shouldn't simply be as a result of cost alone. The environmentally friendliness from the system should also be considered? How efficient may be the system?
