HannerNason682

出典: くみこみックス

Mounted inside the chassis is a motherboard commonly called a backplane to that this drive carriers are generally detachably connected. In the alternate unit, which in turn eliminates the common receiving frame, the removable carriers are connected to one side of the backplane with in the chassis and your pull-out peripheral enterprise boards are associated with the opposite part. This invention pertains to receptacles by which usually different removable carriers having portable computer drives connected regarding either serial or even parallel operation may be interchangeably received in the same chassis or perhaps storage enclosure to be able to be interfaced using a host computer without having to make alterations towards computer drives or even the chassis. Appropriately, it would be desirable permit different removable laptop or computer drive carriers for being interchangeably inserted in the same drive bay of a chassis regardless of whether the computer push is connected for rocketport 16 port rj45 rackmount or parallel operation and and never having to make alteration for the chassis or for the drive. A printed circuit board that's electrically connected towards multi-pin connector is mounted on and faces outwardly from the back wall of the U-shaped body. In such cases, the integrated circuit chip on which the bridge is actually implemented is linked with a printed circuit board that is certainly mounted on the back wall of service. The serial-to-parallel connection is implemented as an integrated circuit chip that is certainly connected to the circuit board in the back wall with the universal receiving body without requiring living space consuming wires or cables to become interfaced with the chassis when the frame is positioned. A corresponding plurality associated with pull-out peripheral enterprise boards are detachably, and connected towards the opposite side of the backplane in an attempt to be interconnected along with respective ones of the portable drives inside the removable carriers. In an attempt to accommodate both this upci quad db9 serial card and parallel connected computer drives. Therefor remains linked to the circuit board at the back wall on the receiving frame. In some instances, however, the peripheral circuit board can be connected to the top of backplane after which coupled to the rear by using a cable. Based on how the pull-out peripheral enterprise board is interfaced with hardware which is external to chassis, either a serial-to-serial or possibly a rocketport 8 port db9m surge converter is attached to the circuit board which is detachably connected towards the rear of backplane. The drive interface connector is at turn, connected to the male SCA backplane interface connector that's mounted guiding the removable disk drive carrier. From the installed computer hard drive assembly, when the removable disc push carrier is been given within its chassis, the male backplane interface connector guiding carrier is detachably linked with a complementary feminine SCA backplane interface connector that is associated with a backplane.