Grill Burner Comparison: Cross Sections
出典: くみこみックス
All stainless steel burners are not created equal. When comparing burner systems, there are a few essential points to look for. Most producers use stainless steel sheet metal to make their burner systems. The downside of sheet metal burners is that they are prone to a process referred to as burn-via. The manufacturer's warranty covers sheet metal burners against rust-by means of, but does not cover against burn through. To combat burn via, choose suppliers use CAST stainless steel burners. The warranty on these burners does cover burn-through as nicely as rust-through, twisting, warping and any other difficulties.
Compared side by side it is plain to cleaning weber gas grill see by our photos at Gas Grills Now, that where a sheet metal burner is not as thick as a U.S. quarter, a cast stainless steel burner is a full INCH thick. Along with becoming thicker, note the placement of the burner ports on the side of the burner. On the sheet metal burners, the ports are exposed to grease drippings, and food particles, discount weber gas grills which can clog the ports and speed up the burn-via approach. The cast burner is designed with a protective ridge, so that drippings can not speak to the ports.
There are numerous options supplied to the consumer: Cast stainless steel, Tube stainless steel, Sheet stainless steel, porcelain, cast iron and chrome burners.
* Stainless Steel: Sheet Metal burners are the least pricey. They are mainly utilized on grills under $800. A tube burner is far better than sheet metal, but is nevertheless very thin compared to cast. The tube burner is a fantastic location for high finish grill char broil 2 burner gas grill manufactures to cut costs. They are not even as thick as a quarter. As far as I know, all tube burners do not cover burn through.
Cast Stainless Steel is the greatest. Look at the burner pictures and you will see that the cast is 1/4 inch thick.
Warranty covers burn by means of!
* Cast Iron: Cast-iron conducts heat better which makes it the preferred cooking surface for many cooks. To safeguard against the all-natural rusting approach, cast-iron cooking grids have a porcelain finish which needs particular maintenance.
* Porcelain: Porcelain enamel is essentially a highly durable glass which, with coloring oxides and other inorganic materials, is fused to metal at very high temperatures. Most grids are produced of steel rods some are coated with porcelain to make them rust resistant and less difficult to clean.
* Chrome: Chromium is a silver-gray, lustrous, brittle, hard metal that can be extremely polished. It does Not tarnish in air, but burns when heated, forming the green chromic oxide. It is used in plating other metals due to the fact of its hardness and non-tarnishing properties. In alloys with other metals it contributes hardness, strength, and heat resistance. This is quicker to burn via. It takes about 1 to 2 years.
